Hardox 600 Abrasion Resistant Steel Plates

with a nominal hardness of 500 HBW Hardox 600 is a weldable and bendable abrasion-resistant steel which is Suitable for applications where demand higher wear resistance.while maintaining good processability and toughness, Hardox® 600 increases payload and increases service life. Hardox 600 Plate can easily welded and bended. These plates is widely used in various applications that require higher wear resistance and are resistant to abrasion. intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties

The martensitic wear plate HARDOX 600, which typically has a hardness of 600 Brinell, is quenched and tempered for use in extreme abrasion. Hardox 600 Plates come with a uniquely high impact of toughness. They are more likely to suit extreme wear conditions, and they can still be cut and welded, making them an excellent choice for high-performance applications. The alloy Hardox 600 is identified as among the choicest quality abrasion-resistant and wear-resistant steel available in the market.

Hardox 600 Plates are wearing plates with a hardness of Brinell. These plates and other products are ordered especially for severe wear conditions and compete with materials. These materials and procedures are high chromium white alloy fittings, Ni-hards, and hard facing. Notwithstanding Hardox 600 Plates, very high hardness is weldable and can be manufactured thermally cut. When it comes to hardness, the Hardox 600 Plates also have uniquely high impact strength.

Our Hardox 600 Plates are suitable for various industrial sectors that include essential sectors such as sugar, paper, textile, dairy, and engineering. They are also used in complex industrial sectors such as oil and gas, petrochemical, power generation, fertilizers, and chemical industry. These are the wide range of industrial sectors where Hardox 600 Plates are used.

They come with different specifications and have different sizes, lengths, moderative strengths, and working properties. They work flexibly with critical-level applications as they have the versatility to work with different applications.

We Export Hardox 600 Abrasion Resistant Steel Plates to United Arab Emirates, Brazil, Russia, Bangladesh, Indonesia, Egypt, Qatar, Iran, Kuwait, Taiwan, Oman, South Africa, Saudi Arabia, Australia, Pakistan, Malaysia.

Specification

Item	Abrasion Resistant Plate
Material	Hardox 600
Thickness	8-50mm
Width	500-3000mm
Length	1000-12000mm
Heat Treatment	N, Q+T
Surface Paint	EP, PE, HDP, SMP, PVDF

Chemical Composition

Plate	thickness mm	08-30	(30)-50
C	max %	0.45	0.47
Si	max %	0.7	0.7
Mn	max %	1.00	1.00
P	max %	0.015	0.015
S	max %	0.01	0.01
Cr	max %	1.2	1.2
Ni	max %	2.5	2.5
Mo	max %	0.8	0.8
B	max %	0.004	0.004
CEV	typv	0.73	0.84
CET	typv	0.55	0.59

Mechanical Properties

Grade	Mechanical Property		Charpy V Impact Test
HADOX 600	HBW	Elongation	Degree	longitudinal
	Min Mpa	Min %	-40	J
	570-640	10		20