Stainless Steel Grade 304 Coil, Plates & Strips

These Stainless Steel Angle Bar are widely available in Grade of SS 202, SS 304, SS 304L, SS 316, SS 316L. These Stainless Steel Angle Bar are widely used in Architecture, Building Constrution, Kitchen Equipment, Paper Mills and many more.

304 SS is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. Better corrosion resistance than Type 302, Stainless Steel UNS S30400 Angles has high ductility, excellent drawing, forming, and spinning properties, useful for applications where welding is required. AISI 304 Stainless Steel Angles is an austenite steel and is only slightly responsive to magnetic fields. SS DIN 1.4301 Angles is commonly used to process equipment in the mining, chemical, cryogenic, food, dairy and pharmaceutical industries. Typical applications of 304 SS Angles are springs, engineered components, wire mesh, wire cloth, hose braiding.

Grade 304 Stainless Steel Angles are also used in woven or welded screens for mining, quarrying & water filtration, is resistance to corrosive acids. These Type of Angles represent an excellent combination of corrosion resistance and fabricability. The austenitic Type 304 SS Angles are also considered to be the most weldable of the high-alloy steels and can be welded by all fusion and resistance welding processes. Meanwhile, other advantages of this angles are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. Buy 304 Stainless Steel Angles at very competitive price from us.

With the accurate dimension, the 304 angles offer long service life, excellent performance, optimality, and low maintenance. The raw material is well fabricated and is employed by experts. This allows us to offer it in different specification and grades with small cross-section, tensile strength for general engineering and automotive-like gear rods, and piston rods. Using the superlative raw material, our expert got the ability to fulfill emergent within specified time thus serving huge clientele.

The alloy elements are nickel, silicon, manganese, titanium, molybdenum, and chromium. The addition of these elements in the right amount gives it additional features. It is as follows- high-temperature strength, scaling resistance, corrosion resistance, ductility, hot-working properties, increases machinability, and corrosion-resistant.

Since it is austenitic type it features ease of welding, highest corrosion resistance and also adaptability to forming. In cold-working condition, they are magnetic and in the annealed condition they are non-magnetic.

We Export Stainless Steel Grade 304 Angle to United Arab Emirates, Brazil, Russia, Bangladesh, Indonesia, Egypt, Qatar, Iran, Kuwait, Taiwan, Oman, South Africa, Saudi Arabia, Australia, Pakistan, Malaysia.

Stainless Steel 304 Angle Specification

Standard	ASME, ASTM, EN, BS, GB, DIN, JIS, etc
Size	3/4″ THRU 8″
Thickness	1/8″ thru 5/8″
Type	Stuctural Steel Angle, Bars, Equal, Unequal, L, T, Hot Rolled
Grades	304/304L/304H/310S/316/316L/316H/316TI/317/317L/321/321H/904L

To the buyers, we are providing it in different standards, sizes, dimensions, wall thickness, length, type, etc. It is too made available in cut-made specifications as per the demands of the clients.

Stainless steel 304 is the austenitic stainless steel T-300 alloy. It is having a maximum of 8% nickel and chromium of 18% addition to 0.08% of carbon. This alloy is termed as a nickel-chromium austenitic alloy. Grade 304 is standard 18-8 stainless that is found in kitchen appliances. Some of the features of the alloy are that it is having very good welding and forming properties. Due to the addition of chromium, corrosion resistance, oxidation resistant has become possible. It is having deep drawing quality. The alloy is very good toughness even at the down to a cryogenic temperature that is defined as the low temperatures. The low-temperature property is responding to the hardening very well through the cold working. It is having ease of cleaning and ease of fabrication ability as well.

The manufacturing of the Stainless steel 304 channel is done with the effective use of superior quality of alloy that is sourced from the reputable market mills. The alloy that we are using is collected from the reliable market mills and is certified. The use of refined technology and modern tools allows us in the development of the fine quality of channel so that it can be used at greater tough condition atmosphere. The guidance of professionals to the workers at all level of production stages has allowed us in to offer the fine quality of channels. The designing of the complete ranges of the channel that we are offering is done as per set manufacturing norms and product quality standards.

We Export Stainless Steel Grade 304 Channel to United Arab Emirates, Brazil, Russia, Bangladesh, Indonesia, Egypt, Qatar, Iran, Kuwait, Taiwan, Oman, South Africa, Saudi Arabia, Australia, Pakistan, Malaysia.

Specification of Stainless Steel Channel 304

Specification	ASTM A276, ASTM A479 / ASME SA276, ASME SA479
Standard	DIN, ASTM, BS and all International Standards.
Material	304 Stainless Steel Plate
Thickness	3.0mm – 120mm
Size	40mm*20mm~300mm*300mm
Length	3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes